Services to realize your dream workshop

Marco Fiorido S.R.L. offers services tailored to respond to the needs of CNC workshop that want to take the quality and quantity of their workpiece production to the next level

Turnkey solutions

A turnkey solution means you will need to worry about nothing.

Starting from your workpiece to be machined, the optimal manufacturing process is drafted, selecting the ideal CNC machine and its configuration, tools and the eventual automation, taking into considerations all the critical variables: expected cycle times, workpiece tolerances and naturally the costs.

This is where Marco Fiorido’s over 20 years of experience come into play. Thanks to the execution of countless workpieces of non-trivial manufacturability, Marco Fiorido’s ability to anticipate the challenges of a specific workpiece, accompanied by the competence to overcome them, sometimes with a touch of ingenuity to come up with innovative solutions, is what sets him apart in the field.

Once the details of the turnkey solution are finalized and accepted, that’s it, you’ll just need to wait for the machine to arrive at your workshop at the scheduled date and for everything to be set up to be production ready. The programming of the cycle and the perfect execution of the first workpieces is our commitment and responsibility!

Curious to see an example of innovative machining?

CrankShaft
Traditionally 3 dedicated machines are used:
  • machining center
  • lathe
  • multitasking
The approach Marco imagined and executed is different
He understood that the Nakamura Tome WT-300 was capable of taking also the machining center job for the front and back features
Nakamura Navigator
The effective use of the Navigator function is just one example of taking advantage of the advanced capabilities of the machine to enable this new way of manufacturing a crankshaft.
Thanks to built-in torque reading macros, the machine allows for accurate orientation without the need of an expensive supplementary probe.
SteadyRest
A steadyrest special fitting on a turret gives the Nakamura the ability to machine front and back features of this workpiece. Keeping both turrets means efficiency is not sacrificed.
Speed or versatility? Both.
5 Axis
Nakamura Super NTJ combines 5-ax with the speed of turrets.
The machine can perform 5-ax deep drilling and it's a perfect companion to the WT-300 as the Super NTJ is also suitable for simultaneous 2 turret turning.
Machining of a crankshaft on a lathe.
Featuring the Nakamura WT-300.

Cycles programming

Unleash the capabilities of your CNC machine and maximize productivity

With the ever increasing complexity of the workpiece to machine and of the sophistication of the CNC machines with machining on multiple axis, twin spindle-lathes with multiple turrets and integrated gantry automation, it’s not trivial to write a CNC program that takes full advantage of the great machine capabilities in the most optimal way.

To get the most out of your investment in your fleet of CNC machines, especially when manufacturing workpieces in great quantities, when every precious cycle time reduction is multiplied by big numbers, the cycle programming hitting optimality is the ideal to look for by any mechanical CNC workshop that aspires to be on top of the competition.

The service of cycles programming and workpiece machining offered by Marco Fiorido targets exactly this industry need, and it also fits perfectly to workshops where the time of the personnel competent in CNC programming, that’s also by the way increasingly harder to find, is often stretched too thin to always program an optimal and most profitable cycle.

Marco Fiorido is particularly specialised, but not limited to, in the programming of Nakamura-Tome CNC lathes, of which perks and quirks he is knowledgeable down to the most minute detail, and of Matsuura machining center.

Curious to see what an optimized cycle looks like?

The most technological machines
require
the most skilled operators
These are the concrete results of an expertly excecuted cycle optimization:
cycle time cut down from 32 to
32 21
s
resulting in 50% more profit from the machine
Marco Fiorido's

optimization

made it possible:
Balanced machining between turrets
Turret early unclamp and X+Z positioning
Part Picking while both turrets are making chips
Efficient B-axis short positioning
And more...
Click rewind and see the cycle at full speed!
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
.
0
1
2
3
4
5
6
7
8
9
s

Courses

Marco is a very effective teacher, he understands what you or your staff want and need to learn: pragmatic and to the point, he makes the best use of your precious time.

He also has experience working with groups in organized courses as well, preparing the most relevant learning material and teaching in an engaging and effective way.

...and more!

Anything related to Nakamura-Tome, Matsuura and CNC machines in general: go and ask me in the Contacts